22. 05. 2013 |
Home
WIKUS Global Website Material groups
1 |
Structural steels, deep drawing steels, machining steels | 2 |
Case hardened steels, spring steels, quenched and tempered steels | 3 |
Low alloyed hot-working steels |
4 |
Nitriding steels, high alloyed hot-working steels | 5 |
Unalloyed tool steels | 6 |
Cold working steels |
7 |
High-speed steels | 8 |
Cast iron | 9 |
Rust and acid-resistant steels (light) |
10 |
Rust and acid-resistant steels (heavy) | 11 |
Duplex and heat-resistant steels | 12 |
Nickel-base alloys |
13 |
Aluminum | 14 |
Copper | 15 |
Brass |
16 |
Aluminum bronze | 17 |
Titanium alloys | 18 |
Steels with tensile strength > 1000N/mm² |
19 |
Abrasive building materials | 20 |
Silicon, glass, glass fiber, marble | * |
Special applications |
Suitable
Recommendation
Article group 528 Vario M42
(approx. 68-69 HRC)
| Dimensions | Tooth pitch in tpi | ||||||
| Width x thickness | SD | ||||||
| mm | inch | 3-4 | 4-6 | 5-8 | 6-10 | 8-12 | 10-14 |
| 6 x 0,65 | 1/4 x 0.025 | S | |||||
| 6 x 0,90 | 1/4 x 0.035 | S | |||||
| 10 x 0,90 | 3/8 x 0.035 | S | |||||
| 13 x 0,65 | 1/2 x 0,025 | S | S | S | |||
| 13 x 0,90 | 1/2 x 0.035 | S | S | S | |||
| 20 x 0,90 | 3/4 x 0.035 | S | S | S | S | S | |
| 27 x 0,90 | 1-1/16 x 0.035 | S | S | S | S | S | S |
| 34 x 1,10 | 1-3/8 x 0.042 | S | S | S | S | S | |
| 41 x 1,30 | 1-5/8 x 0.050 | S | S | S | S | ||
| 54 x 1,30 | 2-1/8 x 0.050 | S | |||||
S = Standard tooth
Material groups
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
*
- For universal use and
serial cuts - For small and medium-sized workpiece dimensions
- For steels of up to 40 HRC and non-ferrous metals
© Copyright WIKUS-Sägenfabrik |
Terms and Conditions