20. 06. 2013 |
Home
WIKUS Global Website Material groups
1 |
Structural steels, deep drawing steels, machining steels | 2 |
Case hardened steels, spring steels, quenched and tempered steels | 3 |
Low alloyed hot-working steels |
4 |
Nitriding steels, high alloyed hot-working steels | 5 |
Unalloyed tool steels | 6 |
Cold working steels |
7 |
High-speed steels | 8 |
Cast iron | 9 |
Rust and acid-resistant steels (light) |
10 |
Rust and acid-resistant steels (heavy) | 11 |
Duplex and heat-resistant steels | 12 |
Nickel-base alloys |
13 |
Aluminum | 14 |
Copper | 15 |
Brass |
16 |
Aluminum bronze | 17 |
Titanium alloys | 18 |
Steels with tensile strength > 1000N/mm² |
19 |
Abrasive building materials | 20 |
Silicon, glass, glass fiber, marble | * |
Special applications |
Suitable
Recommendation
Article group 588 Profidur
(approx. 3800 HV)
| Dimensions | Tooth pitch in tpi | ||
| Width x thickness | |||
| mm | inch | 2-3 | 3-4 |
| 54 x 1,60 | 2 1/8 x 0.063 | T | T |
Professional cutting with PROFIDUR
PROFIDUR is a coated carbide tipped band saw blade that was developed especially for high-performance cutting of girders.
The innovative tooth geometry and an additional hard material coating deliver signifi cantly higher cutting
performances compared to bimetal band saw blades and thus reduced cutting times. In addition, PROFIDUR also has an excellent cutting geometry.
PROFIDUR has already been tested successfully for cutting girders and offers significant performance advantages over bimetal band saw blades.
Please contact our Technical Support to make sure it meets the technical requirements of your sawing machine.
weblink
PROFIDUR is a coated carbide tipped band saw blade that was developed especially for high-performance cutting of girders.
The innovative tooth geometry and an additional hard material coating deliver signifi cantly higher cutting
performances compared to bimetal band saw blades and thus reduced cutting times. In addition, PROFIDUR also has an excellent cutting geometry.
PROFIDUR has already been tested successfully for cutting girders and offers significant performance advantages over bimetal band saw blades.
Please contact our Technical Support to make sure it meets the technical requirements of your sawing machine.
weblink
Material groups
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
*
Your advantages:
- economical cutting and low costs per
cut thanks to higher cutting performance - low burr sawing with excellent
surface quality - you‘ll save machine capacities and
resources thanks to reliable processing
© Copyright WIKUS-Sägenfabrik |
Terms and Conditions