21. 05. 2013 |
Home
WIKUS Global Website Material groups
1 |
Structural steels, deep drawing steels, machining steels | 2 |
Case hardened steels, spring steels, quenched and tempered steels | 3 |
Low alloyed hot-working steels |
4 |
Nitriding steels, high alloyed hot-working steels | 5 |
Unalloyed tool steels | 6 |
Cold working steels |
7 |
High-speed steels | 8 |
Cast iron | 9 |
Rust and acid-resistant steels (light) |
10 |
Rust and acid-resistant steels (heavy) | 11 |
Duplex and heat-resistant steels | 12 |
Nickel-base alloys |
13 |
Aluminum | 14 |
Copper | 15 |
Brass |
16 |
Aluminum bronze | 17 |
Titanium alloys | 18 |
Steels with tensile strength > 1000N/mm² |
19 |
Abrasive building materials | 20 |
Silicon, glass, glass fiber, marble | * |
Special applications |
Suitable
Recommendation
Article group 633 Gigant X3000
(approx. 69 HRC)
| Dimensions | Tooth pitch in tpi | |||
| Width x thickness | Variable tooth pitch | |||
| mm | inch | 0,7 - 1,0 | 1,0 - 1,4 | 1,4 - 2 |
| 41 x 1,30 | 1-5/8 x 0.050 | HV,VA | ||
| 54 x 1,60 | 2-1/8 x 0.063 | HV | HV,VA | |
| 67 x 1,60 | 2-5/8 x 0.063 | HV,VA | HV,VA | HV,VA |
| 80 x 1,60 | 3-1/8 x 0.063 | HV,VA | HV,VA | HV,VA |
| 100 x 1,60 | 4 x 0.063 | HV | ||
HV = Tooth shape HV, VA = Tooth shape VA
Material groups
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
*
- For performance-related use
- For large workpiece
dimensions - For rustproof and acid-resistant steels, as well as nickel-base alloys (VA)
- For high alloy steels of up to 45 HRC
© Copyright WIKUS-Sägenfabrik |
Terms and Conditions