22. 05. 2013 |
Home
WIKUS SAW Technology Corp. 
Material groups
1 |
Structural steels, deep drawing steels, machining steels | 2 |
Case hardened steels, spring steels, quenched and tempered steels | 3 |
Low alloyed hot-working steels |
4 |
Nitriding steels, high alloyed hot-working steels | 5 |
Unalloyed tool steels | 6 |
Cold working steels |
7 |
High-speed steels | 8 |
Cast iron | 9 |
Rust and acid-resistant steels (light) |
10 |
Rust and acid-resistant steels (heavy) | 11 |
Duplex and heat-resistant steels | 12 |
Nickel-base alloys |
13 |
Aluminum | 14 |
Copper | 15 |
Brass |
16 |
Aluminum bronze | 17 |
Titanium alloys | 18 |
Steels with tensile strength > 1000N/mm² |
19 |
Abrasive building materials | 20 |
Silicon, glass, glass fiber, marble | * |
Special applications |
Suitable
Recommendation
Article group 638 SELEKTA GS X3000
(approx. 70 HRC)
| Dimensions | Tooth pitch in tpi | ||||
| Width x thickness | Variable tooth pitch | ||||
| mm | inch | 1,0 - 1,4 | 1,4 - 2 | 2 - 3 | 3 - 4 |
| 27 x 0,90 | 1-1/16 x 0,035 | K | |||
| 34 x 1,10 | 1-3/8 x 0,042 | K | K | ||
| 41 x 1,30 | 1-5/8 x 0,050 | K | K | K | |
| 54 x 1,60 | 2-1/8 x 0,063 | K | K | ||
| 67 x 1,60 | 2-5/8 x 0,063 | K | K | K | |
| 80 x 1,60 | 3-1/8 x 0,063 | K | |||
K = Hook tooth
Material groups
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
*
NEW! In cutting quality X3000 the delivery programme has been expanded for rust- and acid-proof steels which are diffi cult to cut.
- Grinded guide tooth
- For performance-related use
- For excellent finish qualities
- For best straightness
© Copyright WIKUS-Sägenfabrik |
Terms and Conditions