ARION® FG
The Royal Class of Band Sawing
Product Level S
Trapezoid tooth
Solid materials
Band width 54 x 1.1 - 100 x 1.1mm
Add to watchlistAdded to watchlist
has been added to the watchlist.
View watchlisthas been removed from the watchlist.
View watchlist
The Royal Class of Band Sawing
Discover the royal class of band sawing: with ARION® FG and its wear-resistant hard coating. With its carbide band saw blade, WIKUS has created a high-performance sawing tool that delivers maximum cutting power, shorter cutting times, and minimal cutting costs and material waste during the sawing process. Thanks to thin-cutting technology, users can benefit from maximum productivity and cost-effectiveness, especially when cutting steels.
ARION® FG - The high-performance saw band for the highest demands on cutting performance and efficiency.
Application Range
Application:
- Large series and mass cutting processes on high performance sawing machines
- Short piece production of solid materials, structural, case-hardened and tempering steels as well as cast iron
- Forging technology
Advantages:
- Extremely high cutting rate in continuous operation
- Significantly reduced cutting time and highest productivity
- Low material loss due to thin-cut technology and thereby savings in costs and production process
- Precise flatness of the cutting surfaces
- Excellent efficiency by high blade-life
Features:
- Carbide cutting edge with very wear-resistant grade
- Polished trapezoid tooth (FUTURA® geometry)
- Thin-cutting technology with very high blade stability
- Wear-resistant multi-layer hard coating on tooth edges and back edges
Dimensions
Tooth pitch in tpi
| Width x thickness | |
|---|---|
| mm | Inch |
| 54 x 1.10 | 2-1/8 x 0.042 |
| 67 x 1.10 | 2-5/8 x 0.042 |
| 80 x 1.10 | 3-1/8 x 0.042 |
| 100 x 1.10 | 4 x 0.042 |
Contact length[mm][Inch] | |
| 3 - 4 | 2 - 3 | 1.7 - 2 | 1.4 - 2 | 1 - 1.4 | 0.7 - 1 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T | T | T | T | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| T | T | T | T | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| T | T | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| T | T | T | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 90-1503.5-5.9 | 130-2505.1-9.8 | 200-3007.9-11.8 | 250-5009.8-19.7 | 500-80019.7-31.5 | 800-200031.5-78.7 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
T = Trapezoid tooth
- Case-hardening steels, spring steels and ball-bearing steels
- Nitrided steel, high-speed steel and tool steel
- Construction, deep-drawn and machining steels
- Carbon steels, and quenched and tempered steels
- Cast iron
Any more questions?
The experts of our Technical Competence Center are happy to help you answer further technical questions connected to band selection and use.
Deutsch
English
Français
Italiano
Español
日本語
中国的