PROFLEX® PREMIUM SW M42
The coated special design for residual stress materials
Product level 2
Profile tooth
Profiles
Band width 41 x 1,3 - 67 x 1,6mm
The coated special design for residual stress materials
Applications
- Profiles and girders, for steel construction and industrial profile cuts
- Optimal for cutting with interrupted cutting channel
Advantages
- Productivity increase by high cutting rate
- Fewer blade changes due to increased blade-life
- Low finishing thanks to cutting edges nearly withour burr
Features
- Tooth edge and back edge coated with wear protection
- Variable tooth pitch with specific step set
Dimensions
Tooth pitch in ZpZ
| Width x thickness | |
|---|---|
| mm | Inch |
| 41 x 1.30 | 1-5/8 x 0.050 |
| 54 x 1.30 | 2-1/8 x 0.050 |
| 54 x 1.60 | 2-1/8 x 0.063 |
| 67 x 1.60 | 2-5/8 x 0.063 |
Contact length[mm][Inch] | |
| 3-4 | 2-3 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| P | P | |||||||||
| P | ||||||||||
| P | P | |||||||||
| P | P | |||||||||
| 80-1603.1-6.3 | 150-3105.9-12.2 | |||||||||
P = Profile tooth
- Case-hardened steels, spring steels and ball-bearing steels
- Rust-proof and acid-resistant steels (ferretic)
- Nitrided steel, high-speed steel and tool steel
- Construction, deep-drawn and machining steels
- Carbon steels, and quenched and tempered steels
- Cast iron
- Aluminium / aluminium alloys
- Non-ferrous metals
Any more questions?
Our experts in the WIKUS application engineering division will be happy to help you answer further technical questions connected to band selection and use.
Deutsch
English
Français
Español
中国的