
DUROSET® NE
The set special design for non-ferrous metals
- Product level 2
- Hook tooth
- Solid materials
- Band width 20 x 0.9 - 34 x 1.1mmBand width 3/4 x 0.035 - 1-3/8 x 0.042 Inch
has been added to the watchlist.
View watchlisthas been removed from the watchlist.
View watchlist
DUROSET® NE — The set special design for non-ferrous metals
The carbide band saw blade was specially developed by WIKUS for foundry applications for sawing non-ferrous metals. It is particularly convincing for contour and radius cuts on feeders and casting burrs, which are carried out with a manual feed.
Of course, the band saw blade also proves itself in automatic operation. With its high blade-life, it achieves disproportionately high cutting rates even under fluctuating conditions.
Application
- Contour and radius cuts on non-ferrous metals
- Automatic and especially manual feed
- Optimal sawing tool for manual machining of castings
Advantages
- High cutting performance increases productivity
- Particularly high resistance to abrasive wear
- Very high blade-life even in fluctuating conditions
Features
- Extra wide set for contour and radius cuts in non-ferrous metals
- Tooth edge made of specific carbide with special geometry for foundries
- Polished trapezoid tooth with positive rake angle
Functional design against abrasive wear
The structure of the DUROSET® NE consists of a carrier band combined with a tooth edge made of specific carbide. The carbide cutting material, which is specially adapted to non-ferrous metals, results in particularly high protection against abrasive wear.
Dimensions
Tooth pitch in tpi
Width x thickness | |
---|---|
mm | Inch |
20 x 0.80 | 3/4 x 0.032 |
27 x 0.90 | 1-1/16 x 0.035 |
34 x 1.10 | 1-3/8 x 0.042 |
Contact length[mm][Inch] |
3 | 2 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
K | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
K | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
K | K | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
120-2004.7-7.9 | 200-4007.9-15.7 |
- Aluminium / aluminium alloys
- Non-ferrous metals
has been added to the watchlist.
View watchlisthas been removed from the watchlist.
View watchlistAny more questions?
The experts of our Technical Competence Center are happy to help you answer further technical questions connected to band selection and use.