
CUBOGRIT® K
The continuously CBN-coated band saw blade
- Product level 2
- Band width 10 x 0.5 - 100 x 1.1mmBand width 3/8 x 0.020 - 4 x 0.042 Inch
- Workpiece dimension small
- Continuous CBN-coating
has been added to the watchlist.
View watchlisthas been removed from the watchlist.
View watchlist
The CBN-coated band saw blade

WIKUS expands its portfolio of the coated band saw blades by the new product CUBOGRIT® which uses cubic boron nitride (CBN) as cutting material. Cubic boron nitride is the second hardest material known. Besides a high hardness and strength, also thermal and chemical resistance are its properties. Due to these properties, CUBOGRIT® band saw blades are ideal for the reliable processing of hardened ferrous materials and hard alloys as well as for hard alloys produced in 3D-print. From now on, even the hardest alloys up to 70 HRC can be cut economically with CUBOGRIT®.
Application
- hardened high speed steel (HSS), case-hardened steels
- high-alloy tool steels > 55 HRC
- iron-based powder coatings, chilled casting, stellite
- small workpiece dimensions
Advantages
- no chipping at the edge of the contours
- low reworking due to very good cutting surfaces
Features
- complete CBN-coating at the band edge
- backing material made of alloyed tempering steel
CUBOGRIT® K is also available with a backing material made of corrosion-resistant special steel as CUBOGRIT® K VA.
This execution offers the following advantages:
- cooling with pure water
- no corrosion of backing material during longer downtime
Machine requirements:
- cutting speed higher than 1200 m/min
- high machine stability
- high torque of the drive engine
Dimensions
Width x thickness | |
---|---|
mm | Inch |
10 x 0.50 | 3/8 x 0.020 |
13 x 0.50 | 1/2 x 0.020 |
13 x 0.65 | 1/2 x 0.025 |
16 x 0.50 | 5/8 x 0.020 |
20 x 0.50 | 3/4 x 0.020 |
20 x 0.80 | 3/4 x 0.032 |
27 x 0.50 | 1-1/16 x 0.020 |
27 x 0.70 | 1-1/16 x 0.028 |
27 x 0.90 | 1-1/16 x 0.035 |
34 x 1.10 | 1-3/8 x 0.042 |
41 x 0.50 | 1-5/8 x 0.020 |
41 x 0.80 | 1-5/8 x 0.032 |
41 x 1.30 | 1-5/8 x 0.050 |
50 x 0.90 | 2 x 0.035 |
54 x 1.10 | 2-1/8 x 0.042 |
67 x 0.70 | 2-5/8 x 0.028 |
80 x 0.90 | 3-1/8 x 0.035 |
80 x 1.10 | 3-1/8 x 0.042 |
100 x 0.90 | 4 x 0.035 |
100 x 1.10 | 4 x 0.042 |
Alternative band grain sizes and dimensions upon request
- Hardened high speed steel (HSS), Case-hardening steels
- High-alloy tool steels > 55 HRC
- Iron-based powder coatings, chilled casting, stellite
has been added to the watchlist.
View watchlisthas been removed from the watchlist.
View watchlistAny more questions?
The experts of our Technical Competence Center are happy to help you answer further technical questions connected to band selection and use.