CUBOGRIT® S
The segmented CBN- coated band saw blade
- Product level 2
- Band width 10 x 0.5 - 100 x 1.1mmBand width 3/8 x 0.020 - 4 x 0.042 Inch
- Workpiece dimension medium
- Segmented CBN-coating
has been added to the watchlist.
View watchlisthas been removed from the watchlist.
View watchlistThe segmented CBN-coated band saw blade
Application
- Hardened high speed steel (HSS), case-hardening steels
- High-alloy tool steels > 55 HRC
- Iron-based powder coatings, chilled casting, stellite
- Medium workpiece dimensions
Advantages
- High cutting performance
- Individual design of the coating geometry
- Low reworking due to very to good cutting surfaces
Features
- Segmented CBN-coating at the band edge
- Backing material made of alloyed tempering steel
CUBOGRIT® S is also available with a carrier band made of corrosion-resistant special steel as CUBOGRIT® S VA.
This execution offers the following advantages:
- Cooling with pure water
- No corrosion of backing material during longer downtime
In order to achieve an optimal and efficient result for your sawing applications, we will be gladly prepared to advise you on the possible combinations regarding the grain sizes, band saw blade dimensions as well as operating and basic conditions of CUBOGRIT®. Our experts of the technical customer care will gladly get in contact with you.
Machine requirements:
- Cutting speed higher than 1200 m/min
- High machine stability
- High torque of the drive engine
Dimensions
Width x thickness | |
---|---|
mm | Inch |
10 x 0.50 | 3/8 x 0.020 |
13 x 0.65 | 1/2 x 0.025 |
16 x 0.50 | 5/8 x 0.020 |
20 x 0.50 | 3/4 x 0.020 |
20 x 0.80 | 3/4 x 0.032 |
27 x 0.50 | 1-1/16 x 0.020 |
27 x 0.70 | 1-1/16 x 0.028 |
27 x 0.90 | 1-1/16 x 0.035 |
34 x 1.10 | 1-3/8 x 0.042 |
41 x 0.50 | 1-5/8 x 0.020 |
41 x 0.80 | 1-5/8 x 0.032 |
41 x 1.30 | 1-5/8 x 0.050 |
50 x 0.90 | 2 x 0.035 |
67 x 0.70 | 2-5/8 x 0.028 |
80 x 0.90 | 3-1/8 x 0.035 |
80 x 1.10 | 3-1/8 x 0.042 |
100 x 0.90 | 4 x 0.035 |
100 x 1.10 | 4 x 0.042 |
Alternative grain sizes and band dimensions upon request
- Hardened high speed steel (HSS), Case-hardening steels
- High-alloy tool steels > 55 HRC
- Iron-based powder coatings, chilled casting, stellite
has been added to the watchlist.
View watchlisthas been removed from the watchlist.
View watchlistAny more questions?
The experts of our Technical Competence Center are happy to help you answer further technical questions connected to band selection and use.