
CUBOGRIT® U
The CBN-coated band saw blade with toothing
- Product level 2
- Band width 10 x 0.5 - 100 x 1.1mm
- Workpiece dimension large
- Intermittent CBN-coating

The CBN-coated band saw blade with toothing
Application
- Hardened high speed steel (HSS), case-hardened steels
- High-alloy tool steels > 55 HRC
- Iron-based powder coatings, chilled casting, stellite
- Large workpiece dimensions
Advantages
- Large chip space for material abrasion
- Individual design of the segment geometry (special tooth)
- Short cutting time due to high cutting performance
Features
- Raised segments with CBN-coating with variable pitch
- Backing material made of alloyed tempering steel
CUBOGRIT® U is also available with a carrier band made of corrosion-resistant special steel as CUBOGRIT® U VA. This execution offers the following advantages:
- Cooling with pure water
- No corrosion of backing material during longer downtime
In order to achieve an optimal and efficient result for your sawing applications, we will be gladly prepared to advise you on the possible combinations regarding the grain sizes, band saw blade dimensions as well as operating and basic conditions of CUBOGRIT®. Our experts of the technical customer care will gladly get in contact with you.
Machine requirements:
- Cutting speed higher than 1200 m/min
- High machine stability
- High torque of the drive engine
Dimensions
Tooth pitch in ZpZ
Width x thickness | |
---|---|
mm | Inch |
10 x 0.50 | 3/8 x 0.020 |
13 x 0.50 | 1/2 x 0.020 |
13 x 0.65 | 1/2 x 0.025 |
16 x 0.50 | 5/8 x 0.020 |
20 x 0.80 | 3/4 x 0.032 |
27 x 0.50 | 1-1/16 x 0.020 |
27 x 0.70 | 1-1/16 x 0.028 |
27 x 0.90 | 1-1/16 x 0.035 |
34 x 1.10 | 1-3/8 x 0.042 |
41 x 0.50 | 1-5/8 x 0.020 |
41 x 0.80 | 1-5/8 x 0.032 |
41 x 1.30 | 1-5/8 x 0.050 |
50 x 0.90 | 2 x 0.035 |
54 x 1.10 | 2-1/8 x 0.042 |
67 x 1.60 | 2-5/8 x 0.063 |
80 x 1.10 | 3-1/8 x 0.042 |
100 x 0.90 | 4 x 0.035 |
100 x 1.10 | 4 x 0.042 |
30-30 | 20-20 | 12-12 | 8 | 6 | ||||||
---|---|---|---|---|---|---|---|---|---|---|
T | ||||||||||
T | ||||||||||
T | ||||||||||
T | ||||||||||
T | ||||||||||
T | ||||||||||
T | T | |||||||||
T | ||||||||||
T | ||||||||||
T | ||||||||||
T | ||||||||||
T | ||||||||||
T | ||||||||||
T | ||||||||||
T | ||||||||||
T | ||||||||||
T | ||||||||||
T | T |
Grain sizes: B91, B126, B252, B602
Alternative grain sizes and band dimensions upon request
Alternative grain sizes and band dimensions upon request
- Hardened high speed steel (HSS), case-hardened steels
- High-alloy tool steels > 55 HRC
- Iron-based powder coatings, chilled casting, stellite
Any more questions?
Our experts in the WIKUS application engineering division will be happy to help you answer further technical questions connected to band selection and use.