SKALAR® M42

The high-performer for large cross-sections

  • Product level 3
  • Hook tooth
  • Solid materials
  • Band width 27 x 0.9 - 80 x 1.6mm
    Band width 1-1/16 x 0.035 - 3-1/8 x 0.063 Inch

 

Request a quote

SKALAR® M42 — The high-performer for large cross-sections

Sawing tools often reach their limits, especially when cutting large cross-sections. This results in very long cutting times, early deflection and an early end of blade-life. Frequent blade changes result in high tool costs and production delays.

The SKALAR® M42 bimetal band saw blade cuts with considerably reduced cutting forces due to its intelligent cutting division, thus enabling a significant increase in productivity.

 

 

Application

  • Large blocks in industrial production
  • Especially for mixing programs with a large material mix
  • Also for difficult-to-machine non-ferrous special alloys
  • All metals up to a tensile strength of 1000 N/mm2 can be used


Advantages

  • Extremely high cutting rates even with large cross-sections and in continuous operation
  • Short cutting time, lower cutting forces
  • Smooth running and straight cutting surfaces
  • Wide variety of materials to be machined
  • Less frequent blade changes, higher machine availability and output
     

Features

  • High productivity and efficiency due to specially designed cutting geometry
  • Ground contour with specially matched tooth pitch
  • M42 cutting edge with extra positive rake angle
  • Special set for optimal chip division
  • Stability increase in the backing material
  • Excellent chip removal at contact lengths of 2000 mm
     

HNote: This band saw blade is also available as SKALAR® PREMIUM M42 with coating to further increase performance.

Dimensions

Tooth pitch in ZpZ

Width x thickness
mmInch
27 x 0.901-1/16 x 0.035
34 x 1.101-3/8 x 0.042
41 x 1.301-5/8 x 0.050
54 x 1.302-1/8 x 0.050
54 x 1.602-1/8 x 0.063
67 x 1.602-5/8 x 0.063
80 x 1.603-1/8 x 0.063
Contact length[mm][Inch]
 
2.5-3.41.8-2.51.4-1.81.2-1.61-1.40.7-1
K
KK
KKK
KKK
KKKKK
K*K*K*K*
K*K*K*
100-2203.9-8.7180-3507.1-13.8300-60011.8-23.6400-70015.7-27.6500-100019.7-39.4900-200035.4-78.7
K = Hook tooth

*Optimised superfinish:
From now on, this dimension will be changed to the new inline production. This gives the saw band a high quality finish in the form of a shiny, smooth surface. The fine band surface protects the band guides of the machine and increases the fatigue strength. The other dimensions will be successively tightened.

  • Case-hardening steels, spring steels and ball-bearing steels
  • Rust-proof and acid-resistant steels (ferretic)
  • Nitrided steel, high-speed steel and tool steel
  • Construction, deep-drawn and machining steels
  • Carbon steels, and quenched and tempered steels
  • Cast iron
  • Aluminium / aluminium alloys
  • Non-ferrous metals

Any more questions?

The experts of our Technical Competence Center are happy to help you answer further technical questions connected to band selection and use.

Current website / language

Other websites

WIKUS FRANCE S.A.S.
WIKUS SIERRAS CINTAS S. de R. L. De C.V
WIKUS Nordic AB
WIKUS AUSTRIA GmbH
WIKUS Saw Technology, Corp
WIKUS Canada Ltd.
WIKUS Saw Technology (Shanghai) Co. Ltd
WIKUS India Pvt. Ltd.